Rebar and masonry supplier—founded by tradesmen, for tradesmen.
Trusted source for superior reinforcing steel and masonry materials in Northern California.
About Vista Construction Supply
We offer top-tier rebar products and solutions from industry-leading suppliers, domestically and globally, delivering superior materials and innovative solutions tailored to your needs while keeping your bottom line a priority.
Rebar Placement Solutions
Rebar
All Grades and Sizes Import | Domestic
Rebar is a high-strength steel bar used to reinforce concrete and masonry structures, enhancing their durability and load-bearing capacity. Designed to improve tensile strength, it prevents cracking and structural failure under stress. Featuring a deformed surface for superior concrete bonding, rebar is essential for foundations, bridges, roads, and high-load construction projects.
Tie Wire
Black Annealed Tie Wire 15GA, 16GA and 16.5 GA
Soft, flexible, and durable, Black Annealed Tie Wire is designed for easy handling and secure fastening. Its annealed finish enhances ductility, making it easy to twist and tie without breaking—perfect for securing rebar in concrete reinforcement. Commonly used in precast and structural work, it ensures reinforcement remains stable during concrete pouring. Its flexibility also makes it ideal for bundling and organizing materials on-site. Available in various gauges to meet the demands of any con
Epoxy Coated Tie Wire 16 GA
Designed for durability and corrosion resistance, our 16GA Epoxy Coated Tie Wire ensures secure fastening in harsh environments. The protective epoxy coating prevents rust and extends longevity, making it ideal for securing rebar in marine, bridge, and high-exposure concrete projects. Its flexibility allows for easy tying, ensuring reinforcement stays in place.
Stainless Steel Tie Wire 16 GA
Strong, corrosion-resistant, and built for longevity, our 16GA Stainless Steel Tie Wire is ideal for securing rebar in harsh environments. Its stainless steel construction prevents rust and degradation, making it perfect for marine, chemical, and high-moisture concrete applications.
Black Annealed Loop Ties 6" 1000 Count Roll
Pre-cut and easy to use, our 6" Black Annealed Loop Ties provide a secure and efficient way to fasten rebar and mesh in concrete reinforcement. The black annealed finish enhances flexibility for quick twisting while maintaining a strong hold. Ideal for high-volume tying applications, these loop ties save time on-site and ensure a reliable connection for rebar placement.
Bundling Wire
Black Annealed Bundling Wire
100 Pound Rolls / 10 Rolls Per Bundle
Durable and flexible, Black Annealed Bundling Wire is ideal for securing materials in construction and industrial applications. The annealed finish enhances pliability while providing corrosion resistance for long-lasting performance.
- 6GA: Extra-thick and highly durable, designed for heavy-duty bundling.
- 8GA: Strong yet flexible for versatile fastening.
- 9GA: Ideal for general-purpose bundling.
- 12GA: Lightweight and flexible for detailed tying.
Concrete Dobies
High-Quality, Sustainable Supports ✅ Standard 4000 PSI – Additional strength available at an added cost. ✅ D.O.T. Approved (in most states) – Meets regulatory requirements for reliable performance. ✅ CRSI Class 1 Bar Support – Fully compliant with industry standards. 🇺🇸 100% Made in the USA – Manufactured domestically to ensure top quality and durability. 🔍 Click below on each product for details.
Concrete dobies with wire are typically similar in size as the plain concrete dobies, with two wires protruding out of the top of the brick for tying to the rebar. These concrete spacers meet all the standard PSI specs and can optionally be ordered with additional strength.
Application:
On grade, metal decks, side-form spacers, pools.
Cover Height:
From 3/4″ to 4″
Features:
Furnished with two 16 gauge wires for secure attachment.
Built in grooves to create a cradle for the rebar to set in. This allows for many usable dimensions from one brick. For ex., the 3 x 4 x 3 inch combo has an outside dimension of 3 inches by 4 inches. With the two grooves this product will provide cover heights of 2 ½”, 3”, 3 ½”, and 4”.
Range in size from 2x2x3/4”, all the way up to 5” and 6” in dobies. They come with or without tie wire inserted in the concrete brick. As is the case for all our concrete spacers, we manufacture these in regular strength, 4000 psi mix design, or higher strength for custom jobs.
Uniquely supports two mats of reinforcement when used with 90 degree bend rebar dowel. Dowel hole made to accept #4 rebar. Depth of hole is 1/2″ from bottom. Ideally suited for heavy rebar mats on-grade.
Application:
On grade
Cover Height:
From 3″ to 5″
Features:
Uniquely supports two mats of reinforcement when used with 90 degree bend rebar dowel.
Plastic Spacers & Wheels
♻️ Eco-Friendly & USA-Made 🇺🇸 Our plastic supports are made from 100% recycled materials, reducing waste and promoting sustainability. All plastic supports are proudly manufactured in the USA. Built to last. Engineered for performance. 🔍 Click below on each product for details.
Tilt chairs are available in sizes from ¾” to 6”. Chairs up to 3” feature a single cover height, while those over 3” offer two cover heights, saving you time and storage space.
The wide, stable base is engineered to support heavy loads and protect wood forms, making it ideal for architectural applications. Generous leg spacing allows for easy rebar tying, improved concrete flow, and better consolidation. Additionally, large, easy-to-read height markers ensure quick and accurate setup.
Screed chair supports lumber or pipe screeds for versatile applications. Use a 1" O.D. PVC pipe cut to length, then fine-tune the screed height with the durable, adjustable threaded ring. Available as a complete set (base, ring, and receiver) or base only, the base measures 4-3/4" diagonally and 1-1/4" high, while the receiver is 2-3/8" wide externally.
The ProTilt Chair ranges from ¾" to 3" in ¼" increments, with two cover heights per size to reduce storage needs. Its extra-wide footprint ensures stability, outperforming lighter alternatives, while added cradle support increases strength. The footprint design, inspired by slab bolster, makes it ideal for formwork, mud slabs, and tilt-slab applications.
Plastic rebar support high chairs range from 3” to 14” in height. Chairs from 3” to 12 ¼” feature two cover heights, while those above 12 ¼” have a single cover height. Designed for strength and stability, they can straddle lower rebar mats, support heavy loads, and protect wood forms. The innovative “Z” top ensures maximum strength, easy rebar tying, and optimal concrete flow, with large height markers for quick setup.
Plastic rebar support high chairs range from 3” to 14” in height. Chairs from 3” to 12 ¼” feature two cover heights, while those above 12 ¼” have a single cover height. Designed for strength and stability, they can straddle lower rebar mats, support heavy loads, and protect wood forms. The innovative “Z” top ensures maximum strength, easy rebar tying, and optimal concrete flow, with large height markers for quick setup.
On Grade Square Concrete Chairs range in size from 1 1/2” to 6 1/4” in height. Each plastic high chair has two cover heights; for example, 1 1/2” and 1 3/4” is a single chair; 2” and 2 1/4” is a single chair, on up to 6” and 6 1/4”. These plastic chairs have a wide, stable base designed to carry heavy loads in demanding on-grade applications. They also have large spacing between the legs for easy tying to rebar, maximum concrete flow and consolidation, and easy-to-read height markers.
Space wheels, ranging in size from ¾” cover to 3” cover, are designed for ease of installation and a secure connection to reinforcing steel or mesh. Unique design allows for use of our space wheels on typical rebar sizes as well as #2 mesh setting us apart from the competition. Simply push the space wheel onto the reinforcing steel for a secure compression fit and in the case of #2 or #3 mesh or bar, lock the tabs in pace for a secure connection.
Designed to work with all of our chairs. Whether you’re using our high chairs or tilt chairs in an on-grade application, our sand plate attaches easily and securely to our chairs and provides for a large, stable base to ensure proper chair and rebar placement.
Slab Bolster
Ranges from ¾” to 3” in height and designed to be extremely strong and stable yet also able to work well in architectural applications. Featuring the industry's best coupler, it’s easy to place and securely connect, saving time and money. The form-guard leg tip prevents damage to expensive forms. Available in 10-foot pallet bundles or 2-½ foot boxed lengths, it ensures efficient rebar placement without the hassle of inadequate supports.
Form Supports & Spreaders
Typically used by general contractors in bridge decks and other concrete forming applications. They come in longer sizes such as 24” or 48”, and depending on length, will be reinforced with rebar. Form supports are also stocked in 5”, 5 ½”, 6”, and many other heights. All Spreaders are 3″ x 3″ dimensions, in lengths from 5 1/2″ to 48″. Standard Lengths listed below.